ArduinoX-Pie Shield
Robotics shield for Arduino UNO: 4 motors, line sensor, ultrasonic, servos and a camera port on one board.
₹1,499
Programmed with the free Arduino IDE · Delivery across India
About this kit
The ArduinoX-Pie Shield turns an Arduino UNO into a robot controller. It drives up to 4 DC motors and has ready ports for a line sensor, an ultrasonic distance sensor, 3 servos, 3 sensors, an external camera module, I2C and UART, so students can build line followers, obstacle avoiders, robotic arms and Bluetooth cars without messy wiring.
Features
- Fits on Arduino UNO (and UNO-compatible boards)
- Motor drivers for 4 DC motors (M1-M4), for 2-wheel and 4-wheel robots
- Line sensor port (left, middle, right) for line-follower robots
- Ultrasonic sensor port (5 V, TRIG, ECHO, GND) for obstacle-avoiding robots
- 3 servo ports for robotic arms, grippers and pan-tilt heads
- 3 sensor ports for IR, touch, light and other modules
- Port for an external camera module
- 4 I2C pins and a UART port for OLED, Bluetooth (HC-05) and other modules
- On-board power regulator for motors and logic
12 robots you can build
- Line follower robot
- Obstacle-avoiding robot
- Bluetooth-controlled car
- Edge-avoiding (table) robot
- Robotic arm with 3 servos
- Pan-tilt camera robot
- Light-seeking robot
- Hand-follower robot
- Smart dustbin
- Parking assistant with ultrasonic sensor
- 4-wheel drive explorer
- Maze-solving robot
Specifications
| Compatible with | Arduino UNO R3 form factor |
|---|---|
| Motors | 4 DC motor outputs (M1-M4) |
| Servo ports | 3 |
| Sensor ports | Line (L/M/R), ultrasonic (TRIG/ECHO), 3 general sensor ports |
| Communication | I2C (4 pins), UART |
| Camera | External camera module port |
| Programming | Arduino IDE (C/C++) |