DC fan / motor module (with transistor) with TinkerPie
A fan with its own driver board. For wheels, use MOTOR 1 / MOTOR 2.
| Type | Outputs and actuators |
|---|---|
| Connect to | any accessory pin |
| Gives | 0-100 % speed |
| Simulator | Yes: a control appears under the simulated board |
How to wire it
Signal pin to S1-S4 or P10-P13. Motors, pumps and lamps always go through the relay or a driver module, never straight to a pin.
Code
In blocks: Accessories category in TinkerPie Studio. As code:
// JavaScript
outputs.fanSpeed(Pin.S1, 70)
// Arduino C++
outputs::fanSpeed(Pin::S1, 70)